Wireless LED on Notebooks
December 30, 2007 Reading time: 2 minutes See Comments
Having just installed Mandriva Powerpack 2008 (and it is very good by the way, you can buy it at http://www.divtech.com.au), I found that all the hardware of my notebook was automatically identified and worked perfectly. With the exception of the wireless LED. I have the Intel Centrino using the ipw2200 driver, the wireless works perfectly but the LED according to the documentation is an experimental option.
In order to activate it I only had to add the line “options ipw2200 led=1″ to the /etc/modprobe.conf file. I used “vi” in order to do this (you need to have root privileges). Alternatively if you want a graphical way to do it go into “Configure your Computer”, its on the quick launch bar in Mandriva 2008, select “Hardware”, the “Browse and Configure Hardware”, the hardware list will then be compiled and displayed.
In the list you should find a category called “Ethernet Card” and as a sub-category to that you will see your wireless card listed (something like “PRO/Wireless 2915ABG” or similar). Select the card and in the right hand windows click on “Set current driver options”. The windows that comes up will show all the parameters to the ipw2200 driver, scroll down to find the “led” parameter and enter “1″ into the textbox. Click “OK” to save. You can then exit the control centre. You will probably need to reboot to activate the LED function. Even though the LED option is experimental it seems to work fine for me.
I would appreciate your feedback if you have comments, corrections or additions to this article, Thanks.